Microsoft Certified: Power Platform Developer Associate (PL-400)

D is correct.

Explanation: Asynchronous plug-ins are executed via a system job after the operation completes. Dataverse allows asynchronous registration only for the PostOperation stage. Registering in that stage with asynchronous mode meets the requirement that the logic run after the operation without making the operation wait for the logic to finish.

A is incorrect: Asynchronous plug-ins can only be registered for the PostOperation stage, so Pre-Validation registration is not available even though the asynchronous mode is correct.

B is incorrect: Pre-Operation supports synchronous logic that changes values before save, but asynchronous plug-ins cannot be registered for that specific execution pipeline stage.

C is incorrect: Synchronous plug-ins run immediately and the entire operation waits until they complete, which does not match the system job that runs after completion.

A is correct.

Explanation: In Dataverse, managed layers stack in their installation order, meaning the last one installed sits above the earlier ones. When you uninstall Solution B, the managed solution directly below it takes effect, which is Solution A in this scenario. System defaults apply only after all managed solutions are uninstalled.

B is incorrect: System solution defaults apply only when you uninstall all managed solutions, and Solution A is still installed in this environment.

C is incorrect: The unmanaged layer holds unmanaged solutions and impromptu customizations, and it is not the layer directly beneath a managed solution.

D is incorrect: Uninstalling one managed solution does not remove another; the solution below it takes effect, so Solution A remains installed and active.

C is correct.

Explanation: A cold start keeps captured events free of data caching effects. To ensure a cold start, you must enable the Debug published app setting, save, publish, and launch Monitor from make.powerapps.com. The custom Trace messages will then accurately mark the start and end of the OnStart processing in the event log.

A is incorrect: Manually rerunning OnStart from within Power Apps Studio can introduce data caching, which negatively influences the captured events and invalidates the test.

B is incorrect: Rerunning OnVisible manually from within the studio also risks data caching influence and does not provide a cold start of the published app.

D is incorrect: Browser developer tools show similar event information but lack specific app context details such as the control name and the exact formula.

B is correct.

Explanation: Referencing data in a related table, such as the address of a primary contact, requires using a client script and the Web API. Furthermore, business logic that must run on the Save form event also requires a client script. A single script meets both of these requirements.

A is incorrect: Business rules run on form load and field change unless the scope is table, and they cannot reference related table data.

C is incorrect: A table-scoped rule applies logic on the backend, but referencing related table data still requires using a client script and the Web API.

D is incorrect: Calculated columns run logic on retrieve, so client-side changes do not appear until the form refreshes. They do not update instantly.

D is correct.

Explanation: When the service uses Cross-Origin Resource Sharing, the Azure API Management domains, usually azure-apim.net, should be on its CORS allow list. The other Microsoft Entra ID steps are already done, so the remaining documented step is the CORS setting on the service. This lets the service accept requests that come through the connector.

A is incorrect: Redirect URLs are added to the connector app registration, not to the service, and that step is already complete here.

B is incorrect: Basic authentication would remove Microsoft Entra ID identity pass-through and does not address the CORS configuration on the service.

C is incorrect: The resource URL is a required connector parameter for the service. Removing it does not configure CORS on the service.

B is correct.

Explanation: The System Jobs view in the Admin center shows whether the integration step ran successfully after you create an account. A successful run displays a Status Reason of Succeeded. If the step fails, you must open the specific System Job record to view the detailed error information and troubleshoot the integration run.

A is incorrect: The Shared access policy supplies the connection string credentials for Dataverse. It doesn't show whether a step ran or failed.

C is incorrect: The Message Format setting specifies JSON, XML, or .NETBinary for the message. It doesn't report step run status or errors.

D is incorrect: The connection string only gives Dataverse access to the namespace. It doesn't display integration run results or error information.

B is correct.

Explanation: When multiple synchronous plug-ins are registered for the same pipeline stage, the execution order attribute determines which one runs first. Set this attribute for each step in the Plug-in Registration tool so the validation plug-in has the earlier order while both remain in the same stage.

A is incorrect: Asynchronous plug-ins are dispatched as a system job and run after the operation completes, so this makes the plug-in run later, not earlier.

C is incorrect: Messages represent the type of operation, so changing the message changes when the logic runs, not the order of plug-ins on the same message.

D is incorrect: Registration sequence is not the documented control. The execution order attribute, set in the Plug-in Registration tool, determines which synchronous plug-in runs first.

C is correct.

Explanation: A patch solution contains only the changes for a parent-managed solution, such as adding or editing components and assets. While patches are useful for making small updates like hotfixes, you cannot delete components with a patch. The team must use a different update method to remove the obsolete component.

A is incorrect: A patch solution can add or edit components, but the platform strictly restricts you from deleting existing components with a patch.

B is incorrect: A patch contains only specific changes and is layered on top of the parent solution rather than completely replacing the parent layer.

D is incorrect: When patches are imported into a Dataverse environment, they are layered on top of the parent solution, not placed below it.

B is correct.

Explanation: Clearing the Update property allows the form to submit, but it does not automatically create the relationships. Saving the combo box selection to a collection first preserves the data, because form submission resets the fields. You can then use the saved collection to establish the relationship.

A is incorrect: View mode prevents editing. The edit capability requires the DisplayMode property set to Edit, and this change does not fix the form submit error.

C is incorrect: The Items property must use the Choices() function for the table on the other side of the relationship to resolve the initial control error.

D is incorrect: The new desk row does not exist until the form is submitted, and the form submission resets the fields and loses the selected values.

B is correct.

Explanation: The buttonClick method copies the textbox value to the name variable and then calls the notifyOutputChanged method. This callback alerts the framework that the control has new outputs ready to be retrieved asynchronously. The framework can then retrieve them through the getOutputs method and push the updated value to the host app.

A is incorrect: The updateView method handles updates coming from the host app into the component, not changes pushed from the component to the host.

C is incorrect: The destroy method only removes the event listener during cleanup and does not report output changes to the framework.

D is incorrect: The init method runs once to set up the component and create its elements, so it cannot report later user edits.

C is correct.

Explanation: Connections can't be included in a solution. A connection reference can be included, and it points to a connection outside the solution. During import to the target environment, the user is prompted to provide a connection, and can create one if needed. The solution's apps and flows then use that connection.

A is incorrect: Connections can't be within a solution. Only a connection reference can be included, which points to a connection outside the solution.

B is incorrect: Sharing applies to standalone connectors. Access to connectors and connection references in solutions is controlled by Dataverse role-based security instead of sharing.

D is incorrect: Deleting a shared connector deletes all associated connections. It does not move connections to another environment.

A is correct.

Explanation: Webhooks are the correct choice when synchronous processing is required, when the whole transaction must fail unless the external service succeeds, and when a third-party Web API already exists. Furthermore, webhooks support header and query string authentication instead of Shared Access Signature authentication, which perfectly matches all the scenario constraints.

B is incorrect: Dataverse supports only asynchronous processing against Service Bus endpoints, so the transaction can't fail based on the external service's result.

C is incorrect: Multiple subscribers suit Service Bus scenarios, but this scenario requires synchronous processing and integration with an existing third-party Web API.

D is incorrect: Event Hubs ingests event streams and doesn't make the Dataverse transaction fail based on the external service's processing result.

C is correct.

Explanation: Column-level security is an out-of-the-box Dataverse feature that simply needs to be configured. Developers should use what the platform does well instead of rebuilding behavior from earlier custom applications. Writing custom code for achieving desired business application functionality should be considered as an exception to no-code and low-code approaches.

A is incorrect: A plugin would add custom code for a capability Dataverse already provides through configuration, which adds maintenance without need.

B is incorrect: Client scripting runs only on model-driven forms and is an alternative when declarative options are insufficient, which is not true here.

D is incorrect: A custom API is a code-first message for custom logic and would duplicate a feature that needs only configuration.

D is correct.

Explanation: The solution unpack command reversibly decomposes a solution zip file by dividing it into a logical folder structure. This process splits the massive schema definition file into smaller files, producing an output that can be more readily maintained by a source control system.

A is incorrect: The solution pack command is not used to decompose a zip file; unpack is the command that creates the logical folder structure.

B is incorrect: The solution upgrade process optimizes the import of managed solutions, but it does not decompose an exported zip file for source control.

C is incorrect: The Microsoft Power Platform CLI provides the solution unpack command; the admin center does not divide the solution into a folder structure.

D is correct.

Explanation: The Duration column helps you identify slow actions, and its recorded values are always represented in milliseconds. By filtering this column to show values exceeding 1000 ms, you isolate the long-running events that take more than one second, allowing you to optimize query criteria or reduce the volume of returned data.

A is incorrect: The global filter searches all columns for text matches. Searching for Error finds failures, not successful actions that exceed a specific duration threshold.

B is incorrect: Clearing data provides an empty event log for new tests, but without applying a column filter, you must still scan every captured event manually.

C is incorrect: The Result column labels errors to help identify failures. A slow action often succeeds, meaning this filter would completely miss the long-running queries.

C is correct.

Explanation: The default package type is a Managed solution. If you want to export as Unmanaged, you can uncomment the PropertyGroup section from your Solutions.cdsproj file and edit the SolutionPackageType node accordingly. You can then rebuild the project to generate the solution zip file with the required package type.

A is incorrect: The /restore flag is needed only for the first time the solution project is built and does not affect the package type.

B is incorrect: The Release configuration issues a production build and changes the output folder, but it does not change the package type.

D is incorrect: The pac pcf push command creates a temporary solution for testing and does not set the package type of the output.

B is correct.

Explanation: Two actions cannot point to the same path. Give the new action a path that does not exist on the API, such as /ListBigInvoices. Then use the Route request policy template to send these action calls to /ListInvoices. Route request modifies the path, so both actions work without conflict.

A is incorrect: Set host URL changes the host, not the path, so it does not resolve the duplicate path conflict.

C is incorrect: Set property adds or updates properties on an object or collection in the body, not the action path.

D is incorrect: Set query string parameter adds or updates query parameters and cannot change the request path to /ListInvoices.

C is correct.

Explanation: You should use the HTTP PATCH method when you perform an update of multiple attribute values. PATCH methods provide upsert capability if you provide an ID value as part of your request. This is a highly beneficial feature when you synchronize data between systems.

A is incorrect: You use the HTTP POST method to create rows. It is not the documented method for updating multiple attributes with upsert.

B is incorrect: You use the HTTP PUT method if you are updating a single attribute value. This scenario changes several attributes, preventing PUT.

D is incorrect: Using the HTTP DELETE method followed by POST requires two requests. PATCH performs the update and upsert in a single request.

B is correct.

Explanation: Extending Dataverse as a platform is required whenever there is a need for automation or behavior not supported by existing features. Plug-ins run as server-side code in Dataverse. Synchronous processing by plug-ins allows any Dataverse modifications to be treated as a single unit of work in a transaction.

A is incorrect: Cloud flows provide asynchronous automation and cannot do everything plug-ins do for synchronous behavior, so they do not provide the required single unit of work transaction.

C is incorrect: HTML web resources display custom presentation logic on forms. They extend the user experience and do not run server-side transactional logic.

D is incorrect: PCF code components extend the user experience across Power Apps types. They do not extend Dataverse platform processing with transactions.

A is correct.

Explanation: Solutions transport only metadata, such as tables, their columns, and configuration data. No business data is transported. The test environment receives the table definitions and the app, but the existing records stay in the source environment. You must inform the manager that business data requires a separate migration process.

B is incorrect: Exporting as managed changes the solution type for deployment, but business data still is not transported with the solution.

C is incorrect: The documented behavior has no exception for model-driven apps. Only metadata is transported, not business data, for any table.

D is incorrect: Adding a flow packages the flow as a component. It does not cause table records to be included in the solution.

B is correct.

Explanation: The AddColumns table shaping function is only partially delegable. While formulas in its arguments, such as LookUp, can be delegated to the data source, the final output of AddColumns remains subject to the nondelegation record limit. Consequently, the outcome is constrained to the initial segment of the Products data source.

A is incorrect: The LookUp function is delegable in this pattern. The record limit comes from the AddColumns output constraint, not from the LookUp function itself.

C is incorrect: AddColumns is not fully delegable. It possesses partial delegability, meaning the entire formula result remains constrained to the initial segment of the data.

D is incorrect: AddColumns can use a data source directly. Caching with Collect is an alternative approach for a small, stable Suppliers dataset, not a requirement.

A is correct.

Explanation: On the main grid, the active data is the table of rows shown. The Self.Selected.AllItems property holds all of the rows selected from the data source. Counting them with CountRows and comparing the result to zero ensures the command is visible only when at least one row is selected.

B is incorrect: Item is available only for a single selected row or a form showing one row, so it is not suited to a grid.

C is incorrect: The Unsaved property returns true only when there are unsaved changes. It does not indicate whether any rows are currently selected.

D is incorrect: The State property indicates the Edit, New, or View state of the hosting control. The value 1 means New, not row selection.

D is correct.

Explanation: Because the tags string is in the API output, the policy must run on the response. The Convert delimited string into an array of objects template parses the string and adds a new array, such as taglist, to the response. This improves usability for apps and flows.

A is incorrect: Convert an array to an object does not parse a delimited string, and the request does not carry this data.

B is incorrect: Convert an object to an array starts from an object, not a delimited string, so it does not create taglist from tags.

C is incorrect: The template is correct, but running on the request shapes data sent to the API, not the response output.

A is correct.

Explanation: You can provide a CallerObjectId in your message header with the user's Microsoft Entra ID object ID. The logic applies all appropriate roles based on the user you are impersonating. The createdonbehalfby value contains the ID of the user who actually performed the operation for another user.

B is incorrect: Assigning roles to the integration account does not run the request as the sales user. The createdby value omits the caller.

C is incorrect: The CallerObjectId must hold the impersonated user's ID. Using the integration account's ID does not apply the sales user's security roles.

D is incorrect: The odata.track-changes preference header retrieves table changes over time. It does not impersonate users or identify who actually performed an operation.

C is correct.

Explanation: Azure Synapse Link for Dataverse supports initial and incremental writes for table data and metadata. Any data or metadata changes in Dataverse are automatically pushed to Azure Data Lake without any additional action. This is a push operation, meaning changes are pushed to the destination without needing to set up refresh intervals.

A is incorrect: Service Bus publishes Dataverse events to queues and topics for messaging. It is not the service that pushes table data and metadata to Azure Data Lake.

B is incorrect: Event Grid routes events between Power Platform and other Azure services. It does not write table data and metadata incrementally to Azure Data Lake.

D is incorrect: The Azure SQL connector lets apps and flows work with data in Azure SQL. It is not a push service for Dataverse changes.

B is correct.

Explanation: Inside the solution, the + Add existing menu lets you incorporate existing apps, tables, and flows. You select Table for existing tables and Flow for existing flows. This action brings the current items into the solution container without requiring you to recreate them from scratch.

A is incorrect: + New creates new items in the solution, so it would produce duplicates instead of using the existing flow and table.

C is incorrect: Export solution packages a solution into a zip file for another environment. It does not add existing items to the solution.

D is incorrect: Import brings a solution zip file into an environment. It does not add existing flows or tables to a solution.

C is correct.

Explanation: The destroy method is invoked when the component is removed from the Document Object Model (DOM) tree. You must use this method to clean up and release any memory the component uses. For React, calling ReactDOM.unmountComponentAtNode prevents performance issues from repeated loading and unloading.

A is incorrect: The init method initializes the component instance. It does not run when the component is removed from the DOM tree.

B is incorrect: The updateView method runs when a value in the property bag changes, not when the component is removed from the DOM.

D is incorrect: The getOutputs method returns bound property values to the framework. It is not the correct cleanup point for releasing memory.

D is correct.

Explanation: When configuring a policy to run on all actions and triggers, you must ensure that any data paths used in the policy parameters are valid for all of them. Limiting the template to specific actions where the data path is valid prevents the runtime errors from occurring.

A is incorrect: The evidence does not support disabling a policy in the designer, and removing the policy would not fix the scope problem.

B is incorrect: API properties are stored separately from the API definition, so importing an updated definition does not overwrite configured policies.

C is incorrect: Policy order controls the sequence of application when using multiple templates. It does not make an invalid data path valid.

B is correct.

Explanation: The Microsoft Power Platform Connector CLI provides a dedicated command-line tool to create, download, update, and validate custom connectors. It allows advanced editing of the connector definition. You must use this specific tool when preparing a custom connector for open-sourcing or certification, which directly meets the developer's requirement.

A is incorrect: The Power Platform CLI has a Connector category, but open-sourcing and certification preparation specifically requires the separate Connector CLI tool.

C is incorrect: Power Platform Tools for Visual Studio supports building Dataverse plug-ins and project templates, not custom connector validation or certification preparation.

D is incorrect: The Code Generation Tool generates early-bound .NET Framework classes for the table data model and does not manage custom connector definitions.

C is correct.

Explanation: You must open the solution first, because editing solution-aware items starts from within the solution container. Selecting the table and then choosing Edit opens the specific area where you can view the columns, relationships, business rules, and other table details required by the maker.

A is incorrect: Selecting Edit on a flow opens the flow edit mode, which does not display the table columns, relationships, or business rules.

B is incorrect: Selecting Edit on a canvas app opens Power Apps studio, which is used for the app interface and not the table definition.

D is incorrect: Exporting creates a zip file for transport to another environment. It is not the correct way to view or edit table columns.

C is correct.

Explanation: After the runtime calls the getOutputs method, the host validates the output. If a business rule finds the new output invalid, the framework calls the updateView method and passes the old value along with an error message. The component can then update the user interface appropriately.

A is incorrect: The destroy method is invoked only when the component is removed from the DOM tree, not when output validation fails.

B is incorrect: The init method initializes the component instance. Invalid output does not trigger a reinitialization of the code component instance.

D is incorrect: The updateView method is called in both valid and invalid scenarios, allowing the component to display an error message if needed.

A is correct.

Explanation: The x-ms-url-encoding extension applies to parameters that are included in the request URL path. Path parameters are single URL-encoded by default, so setting the value to double makes the connector send double-encoded text. This simplifies handling because connector users do not need to encode the path parameters.

B is incorrect: chunkTransfer supports messages larger than the runtime limit and does not change how path parameters are encoded.

C is incorrect: testConnection runs an operation during connection creation to validate configuration. It does not change encoding of the path parameter.

D is incorrect: x-ms-dynamic-values provides a list of options for a parameter and does not change URL encoding.

D is correct.

Explanation: The RunSolutionUpgradeMigrationStep event handler is called during a solution upgrade when both the old and new solutions are present in the system. This function provides a means to do data transformation or upgrade while a solution update is occurring, which directly matches the developer's requirement.

A is incorrect: InitializeCustomExtension is called to initialize any functions in the custom extension, not to transform data while both solution versions are present.

B is incorrect: PreSolutionImport is raised before the named solution is imported to allow configuration settings, not to transform data during an upgrade.

C is incorrect: AfterPrimaryImport is called after all import steps are complete to allow for final customizations, so it is not the upgrade-time step.

A is correct.

Explanation: The Unpack Solution task breaks the compressed solution file into individual files for each component. Checking those separate files into source control gives the team a detailed log of exactly what changed, instead of showing only that the single large file was modified during the export process.

B is incorrect: Pack Solution builds a solution.zip file from source control for import. It does the reverse of what the reviewers need in this scenario.

C is incorrect: Set Solution Version updates the version number to implement a consistent versioning strategy. It does not split the compressed file into components.

D is incorrect: Import Solution loads a solution into a target environment. It does not create per-component files for checking into a source control system.

C is correct.

Explanation: The global Xrm.Page object is deprecated. To update the script, the handler should receive the execution context as its first parameter, which you enable when registering the event handler. You then call the getFormContext method to retrieve the form context and use formContext.getAttribute to read the column value.

A is incorrect: The formContext.data.process namespace interacts with business process flow data. It does not replace Xrm.Page for reading a standard column value.

B is incorrect: The Xrm.Navigation namespace automates overall application navigation. It does not provide access to the current form's column values.

D is incorrect: The UI object holds controls, and a column can have multiple controls. The data object is easier for manipulating attribute values.

C is correct.

Explanation: The x-ms-dynamic-properties extension is version 2 of the dynamic schema extension. When you support only new flows, you can configure it alone by directly editing the OpenAPI definition. The custom connector runtime calls GetInvoiceSchema with typeId and shows the parameters that the returned schema defines.

A is incorrect: x-ms-dynamic-list is version 2 of the drop-down list of values. It does not change which parameters appear.

B is incorrect: x-ms-dynamic-values returns a list of options for one parameter. It does not retrieve a schema for the object's properties.

D is incorrect: testConnection runs an operation at connection creation to validate configuration. It does not change the parameter list on the action.

A is correct.

Explanation: The custom connector reaches the API through a dev tunnel connected to the locally running API. If the API is not running, the connector has nothing to call, so no data returns. You must keep the API running in a browser tab while building the app.

B is incorrect: The connector and public tunnel already exist. Recreating them does not start the local API that the tunnel forwards requests to.

C is incorrect: The tunnel type does not cause missing data in this scenario. The API must be running for the tunnel to return results.

D is incorrect: Regenerating the app creates an .msapp file from the connector operations. It does not start the API that returns the data.

A is correct.

Explanation: A custom connector can be created for any web API that an OpenAPI document describes. This removes dependencies on others, allowing you to create the connector yourself. The comparison table also lists lower architectural complexity and no extra cost for the OpenAPI document approach compared to Azure API Management.

B is incorrect: Exporting from Azure API Management depends on someone else, adds extra cost, and has higher architectural complexity than an OpenAPI document.

C is incorrect: Dev tunnels connect a locally running API for testing. They do not fit a developer who already holds an OpenAPI document.

D is incorrect: Usage control is a feature of Azure API Management, not OpenAPI. It adds the extra cost and complexity the developer wants to avoid.

B is correct.

Explanation: A plug-in is the correct approach because it can access external data and is maintained by developers. This matches the requirement to retrieve external data synchronously when the save event occurs. A workflow cannot access external data, which is why the existing declarative approach cannot meet the business requirement.

A is incorrect: Synchronous workflows cannot access external data, so they cannot meet the requirement even though they can run synchronously during a save.

C is incorrect: An on-demand workflow cannot access external data, and it must be triggered manually rather than running automatically during a record save.

D is incorrect: Client scripts have limitations when accessing external data, and a form load trigger does not execute during the required save event.

A is correct.

Explanation: To prevent an infinite recursion scenario, you can use shared variables to manually track the execution depth. You should check if a RunCount shared variable exists, initialize it to zero, increment it, and throw an InvalidPluginExecutionException if the value is greater than five to stop execution.

B is incorrect: Output parameters are only provided after the operation occurs and do not contain execution depth tracking data to prevent infinite recursion.

C is incorrect: Entity images provide an immutable snapshot of data before or after an operation, so they cannot store a dynamic run counter.

D is incorrect: A Retrieve request queries entity values from the organization context, which does not track or limit plug-in execution runs during recursion.

B is correct.

Explanation: A list of contacts is returned by the RetrieveMultiple message. You must register the step at the PostOperation stage, read the BusinessEntityCollection from the output parameters, and iterate through each entity to format the phone number. This modifies the returned values without altering the stored digits.

A is incorrect: PreOperation on an Update message modifies data before saving, and it does not execute when a list of records is returned.

C is incorrect: The Retrieve message with a BusinessEntity output parameter handles a single record, but the scenario requires formatting a list using RetrieveMultiple.

D is incorrect: PreOperation on a Create message affects new records before saving and does not format values returned by a multiple-record query.

A is correct.

Explanation: Actions marked as important are prioritized and show first in the maker experience. Actions marked as none or advanced appear only after the user selects the connector. Configuring the daily actions as important meets the requirement to list them first without hiding the remaining actions from the makers.

B is incorrect: The advanced option does not prioritize an action, and the internal option hides the other actions, which violates the stated requirement.

C is incorrect: The internal option hides actions, so all twelve actions would be hidden. Furthermore, sharing does not control individual action visibility settings.

D is incorrect: The none option is the default and shows actions normally. The three daily actions would not be prioritized to appear first.

B is correct.

Explanation: A custom connector created in the context of a solution can be exported and imported into another environment. After the solution is imported, no extra configuration of the connector is required. This option requires Dataverse in both environments and supports robust build automation tooling for deployment.

A is incorrect: Download and import still requires some configuration in the target environment and is used mostly when you cannot use a solution.

C is incorrect: The Connectors CLI automates the manual download and import process when you are not using solutions, so it does not fit.

D is incorrect: Manual recreation is not a documented deployment option and does not provide the robust application lifecycle management capability of solutions.

A is correct.

Explanation: The Recurrence trigger runs the flow daily. The List rows present in a table action retrieves all current rows from the Excel workbook, including any newly added contacts. Placing the Send an email action inside a For Each loop ensures the flow sends an individual message to every row returned.

B is incorrect: A fixed first value would send to one address only, not to every row added to the workbook.

C is incorrect: Without the For Each action, the email step is not run for each row returned by the table.

D is incorrect: A trigger alone does not read workbook rows, and the Subject field does not retrieve table data.

A is correct.

Explanation: When you remove an owner whose credentials are used to access Power Automate services, you must update the credentials for those specific connections. Performing this update ensures that the shared flow continues to work correctly and authenticate properly after your account is removed from the owners list.

B is incorrect: Owners can't change the credentials for a connection that another owner created, so the co-owner can't do this.

C is incorrect: Shared connections can be used only in the flow in which they were created, so moving one is not possible.

D is incorrect: Nothing in the evidence says credentials transfer. Co-owners can use services but not modify another owner's credentials.

A is correct.

Explanation: You must select Add at the bottom of the expression editor to save the expression to the input. If you select out of the inputs first, you lose your changes. Power Automate does not use AutoSave, so the formula is not stored until you explicitly select Add.

B is incorrect: Power Automate does not have AutoSave, so waiting does not store the formula, which is why your changes were lost.

C is incorrect: Typing a forward slash only opens the options drop-down that leads to the expression editor. It does not save the formula.

D is incorrect: Test runs the flow after the expression is saved. It does not save an unsaved formula from the expression editor.

D is correct.

Explanation: The values are stored as text, so you must convert them into actual numbers before the comparison. You use the int function for "12" and the float function for "12.4" because it has a decimal digit. The expression then returns No, because 12 is not greater than 12.4.

A is incorrect: The value "12.4" has a decimal digit, so it requires the float function rather than int to be converted correctly.

B is incorrect: It applies int to "12.4", which needs float because of the decimal digit. The source pairs int with "12".

C is incorrect: Both values remain text. You must convert text numbers to actual numbers before you use them in a logical function.

D is correct.

Explanation: The formatNumber function converts the multiplied result from the first Compose action into a formatted string. The format string 'C2' applies the currency format, and the number 2 sets the exact number of decimal places. The final output displays the total carpet cost as currency for the user.

A is incorrect: The 'C' format string formats the number as currency but does not explicitly specify two decimal places, which the scenario requires.

B is incorrect: The 'N2' string is not the currency format string used in the exercise. The C character formats the number as currency.

C is incorrect: The mul function multiplies numbers. It does not format a value, and 'C2' is not a valid number to multiply.

A is correct.

Explanation: Run as set to Modifying user uses the context of the user who acted on the row. The action must also use Use invoker's connection on its Settings tab. Then the task rows show that user as the creator, and the Delegate role gives John the required privilege.

B is incorrect: Flow owner keeps John as the context, so the tasks would still show John as the creator.

C is incorrect: Scope only determines which rows trigger the flow by ownership and does not change the identity that creates tasks.

D is incorrect: Run as alone does not apply to an action until you select Use invoker's connection, and Row owner might not be the creator.

B is correct.

Explanation: The Expand Query option includes related table data in the action output, but it does not add those related columns to the Dynamic content pane for selection. To use the primary contact data in later steps, you must use a workflow expression to access the data.

A is incorrect: Select columns limits the primary table columns, and fullname belongs to the related Contact table, so it does not appear in dynamic content.

C is incorrect: Upsert a row creates or updates a row and does not retrieve related data for display in dynamic content.

D is incorrect: Pagination applies to returning more than 5,000 rows from List rows and has no effect on expanded data visibility.